Home Gun Reviews Gone Hunting! EEA And Girsan Unview Their New Hunter 10

Gone Hunting! EEA And Girsan Unview Their New Hunter 10

by Gunner Quinn
0 comment
Ready for the hunt and other applications: EAA’s new Witness2311 Hunter 10.

Imported exclusively by the European American Armory (EAA) Corporation, the new Girsan Witness2311 Hunter 10 is a serious double-stack holding 15+1 rounds of 10MM AUTO. It also punches tight groups and will take down deer-sized and smaller game.

No lightweight, not at 40 ounces unloaded, the Hunter 10 can serve as a backcountry bear gun and would be a formidable choice for home defense. Concealed carry? Not for me. I’m only six feet tall and would need to be an NBA center (or always wear a parka!) for this firearm to work for my daily carry.  No doubt some carry a pistol of this size and weight, though.

Available on GunsAmerica Now

MC HIT | http://10.20.60.240/SearchResults.ashx/?format=json&sold=0&sort=listingstartdate&og=1&keyword=Girsan&cid=&numberperpage=10&pagenum=1

Pistol
The Witness2311 Hunter 10 features an accessory rail, ambi-safety, and 15+1 rounds of 10MM AUTO power.

The Witness2311 Hunter 10 is a solid choice for my handgun hunting of deer and hogs. I found a holster and many excellent 10MM ammo types to match up with the Hunter 10. All I need to make this a complete hunting rig is an optic., which EAA provides a great option for as well.

Hunter 10 Features

The pistol features an extended beavertail, a rear sight adjustable for both elevation and windage and an under-barrel accessory rail. The checkering cut into the polymer grips and the sharp texturing along the wide front strap kept my hands solidly on the pistol.

deep textured grip on Girsan handgun
A wide and deeply textured front strap provided an amazing purchase.

Girsan crowned the six-inch steel barrel; a barrel bushing added to the slide’s smooth and consistent action. Of note, the pistol’s slide spring was tight—very tight. No doubt it will loosen with use.

The Hunter 10 employs a double-stack, steel magazine that fits neatly into the pistol’s beveled magwell. The mag loaded easily by hand, too, right up to the 15th round. No mag loader required.

Nosler ammunition next to magazine
The 15-round magazine is loaded easily by hand.

As with most 1911’s, the Witness2311 Hunter 10 employs both a manual safety—in this case, an ambidextrous one–and a grip safety.

The trigger is skeletonized, had the slightest bit of uptake, and then broke very cleanly at 2 pounds, 12 ounces of pull.

skeletonized trigger on EAA Hunter 10
Skeletonized and sporting front serrations, the trigger broke at 2 pounds, 12 ounces.

Redneck Gunsmithing

I began my shooting at 12 yards from a rest at my local outdoor pistol range and soon realized a problem: my eyes. Or one could credit the sights. Me, I’d blame both with emphasis on my eyes.

Both the rear sight blade and the front post sport a black finish, and I had real trouble aligning the sights. My groups sucked. Like three inches at this close distance and using a rest.

Time for some redneck gunsmithing.

factory sights on EAA pistol
Front post before and…
customized front sights
…after some redneck tinkering.

First, I painted the front post white. I covered the rear blade with a strip of blue painter’s tape. With the tip of a very sharp knife, I cut away the excess tape from the sides and the notch.

rear iron sights from factory
Rear sight blade as it arrived.  
Rear iron sights after some upgrades
Blue painter’s tape made the rear blade pop better for McCombie’s eyes.

My groups immediately got tighter. I knew the pistol and shooter were in sync when I punched in five rounds of Winchester Target ammo at .90 inches, the rounds loaded with 180-grain full-metal jacket bullets.

Girsan and EAA Witness 2311 Hunter 10  next to target and Winchester ammo
Winchester 10MM Target punched in at .90” at 12 yards from a rest.

Offhand

I followed up with offhand shooting at ten yards. 

Hornady Custom 10MM AUTO, packing a 180-grain XTP bullet, proved one powerful load. That aforementioned tight recoil spring rocked my hand and forearm unexpectedly hard. Still, I managed to place two four-shot groups at 1.4-inches.

Nosler recently introduced its Assured Stopping Power (ASP) line of self-defense ammunition, and the company sent me several boxes of its 10MM variety. The ASP 10MM is loaded with a 180-grain jacketed hollow point. 

Witness2311 Hunter 10 next to Nosler 10mm ammo
Nosler’s new ASP self-defense rounds at 10 yards offhand.

My two best 10-yard, offhand groups with the ASP came in at 1.4- and 1.7-inches, for five shots each.  

A Hunter?

When I moved onto the 25-yard lane, my white front post wasn’t making it. More tinkering.

I removed the blue tape on the rear sight and affixed a tiny strip of blaze-orange sticky paper (cut from an adhesive target) over the front post. It worked.

Orange tape on front sight aimed at hole in target
One more time: the front post goes orange for longer-range shooting.

I switched over to two 10MM AUTO hunting ammunitions and both did well shooting from a rest.

Hornady Handgun Hunter, featuring a 135-grain Monoflex copper-alloy bullet, placed three-shot groups in the 2.25- to 2.5-inch range. The best group overall was at 1.3-inches.

The EAA Hunter 10 with Hornady ammo and neon green target
At 25 yards, Hornady Handgun Hunter proved very accurate.

Barnes Bullets VOR-TX 10MM also featured a copper bullet, in this case, the ammo maker’s 155-grain TAC-XP hollow point. Those rounds shot low compared to the Handgun Hunter. I adjusted the rear sight accordingly. 

With the Barnes, the Hunter 10 and I made a four-shot group at 1.2-inches. Knowing the pistol was now on, I proceeded to take six shots at a Birchwood Casey orange Target Spot. They clocked in at 1.6-inches.

Girsan and EAA Hunter 10 with Barnes VOR-TX ammo
Barnes VOR-TX 10MM with a 1.6” group at 25 yards.

I’ use the Hunter 10 and either of these ammo brands for deer and hog hunting anytime.

Holster Up

Launched in 1989, Falco Holsters is based in the Eastern European nation of Slovakia. The company makes a wide variety of holsters including one of the best hunting holsters I’ve used, their D109 Forester Leather Chest Holster.

Leather holster
Product shot of the Forester Shoulder Holster from Falco.

When I told the company’s marketing person I was working with the Witness2311 Hunter 10 and hoped to hunt with the pistol, his company made and sent me their Forester holster produced specifically for the dimensions of the Hunter 10. While the company makes many standard-sized holsters, Falco also produces all manner of holsters specific to a customer’s handgun.

Crafted from Italian leather, the Forester placed the pistol to the front left of my torso, and the pistol’s butt faced to my right for an easy draw. A security strap is wrapped over the grip safety, while a spare magazine holder is attached to the main strap above the pistol.

Man in camo wearing leather cross-holster
Made specifically for the Hunter 10, Falco’s Forester Holster is worn by the author.

The Forester was very comfortable and distributed the weight of the Hunter 10 nicely. It will be a perfect addition to my time in the field.

Red Dot Option

EAA also imports Girsan’s optics-ready version of the Hunter 10. For this model, you remove the one-piece rear sight and plate to expose a slide cut that fits the RMS/RMSc optic footprints.

The optics-ready version of the Hunter 10 carries a suggested retail of $1,184, while my open sight-only version comes in at $1,028 retail. In-store, I’d expect to pay roughly $150 less for either model.

READ MORE: A Precise Red Dot: Shield’s Mini Sight Compact (RMSc)

The optics-ready version wasn’t available when I requested a pistol to test. It certainly would’ve been my first choice, my eyes being what they are and red dots giving me a much better chance to shoot well.

red dot on pistol
The EAA Hunter 10 in the optics-ready model.

SPECS: EAA Girsan Witness2311 Hunter 10

Action: Single, Semi-Auto

Caliber: 10MM AUTO

Capacity: 15+1

Barrel: Steel, 6”, 1:16 Twist

Frame: Steel

Grips: Poly, Checkered and Textured

Safety: Manual Ambi and Grip

Sights: Adj. Rear, Metal Front Post (as tested)

OA Length: 9.75”

Height: 5.6”

Weight: 40.5 Oz. (w/unloaded magazine)

Magazine: One (1) 15-Round, steel

MSRP:  $1,028.00

European American Armory

*** Buy and Sell on GunsAmerica! All Local Sales are FREE! ***

Read the full article here

You may also like

Leave a Comment

©2024 Gun Reviews Pro – All Right Reserved.

This website uses cookies to improve your experience. We'll assume you're ok with this, but you can opt-out if you wish. Accept Read More

Privacy & Cookies Policy